Marvel’s Spider-Man Remastered PC Hardware Guide
Official requirements explained
The official minimum lists an Intel Core i3-4160 at 3.6 GHz or an AMD equivalent. That is an old entry-level dual-core-era class of processor by today's standards, roughly the bottom tier in FrameScope's ranking. The minimum GPU is an NVIDIA GTX 950 or an AMD Radeon RX 470, which places it in the older entry band, comparable to a GTX 670. The minimum asks for 8 GB of RAM and 75 GB of storage, and the publisher states that an SSD is not required.
The recommended tier moves up to an Intel Core i5-4670 or an AMD Ryzen 5 1600, with an NVIDIA GTX 1060 6GB or AMD Radeon RX 580 8GB. The GTX 1060 6GB is a mainstream 1080p-class card, and it is the recommended reference point. The recommended RAM is 16 GB, with the same 75 GB storage figure.
The gap between the two tiers is mostly in the graphics card and memory. Meeting the minimum means the game should launch and run at reduced settings. Meeting the recommended tier gives you more room to play at medium to high settings. Official requirements are only a starting reference, and real results depend on drivers, background software and cooling.
The publisher does not list requirements for any tier above recommended, so anything beyond the recommended column is an estimate rather than an official figure.
Recommended builds for three budgets
The entry build pairs an NVIDIA GeForce GTX 1650 4GB with an AMD Ryzen 5 3500X and 16 GB of RAM. It suits players on a tight budget who want to aim for 1080p with medium-low settings. It sits well above the official minimum, so the game has room to breathe.
The mainstream build steps up to an NVIDIA GeForce GTX 1660 Super with an AMD Ryzen 5 3600 and 16 GB of RAM. This combination sits comfortably above the official recommended tier. It is a good fit for anyone who wants 1080p at medium-high settings for long sessions without overspending.
The high-end build uses an AMD Radeon RX 6700 XT with an AMD Ryzen 5 5600X and 32 GB of RAM. It targets higher settings or resolution and leaves headroom for the next few years of games. For most players this is more than the game needs, but 32 GB helps if you stream, record or keep many programs open alongside it.
Graphics settings with the biggest impact
In open-world action games like this, the settings that usually cost the most are shadow quality, volumetric lighting and fog, depth of field, reflection quality, and view distance with crowd and detail density. Shadows and volumetrics often look only slightly different on screen but are expensive for the GPU, so they are the first things to lower. Reflections and view distance affect the look of distant city streets and can be set to medium depending on your card.
Keep anti-aliasing, texture detail and texture quality where you can. These affect sharpness noticeably and cost comparatively little. If the PC version offers ray tracing, it is best left off unless your graphics card handles it well, since it is one of the heaviest options and a stable experience usually matters more.
Upscaling technologies such as NVIDIA DLSS, AMD FSR and Intel XeSS work by rendering at a lower internal resolution and reconstructing the image to your display resolution. On supported hardware this can lighten the GPU load with a modest loss in image quality. Start with a quality mode and adjust based on how the image looks to you.
Laptops and handheld PCs
Laptop graphics chips often share names with desktop cards, such as GTX 1660 Ti or RTX 3060, but they usually deliver less performance because of power limits and cooling. When shopping, check the advertised power limit (TGP) and whether the cooling system can sustain heavy loads for long periods. While playing, keep the laptop plugged in, use the high-performance power mode and make sure airflow is not blocked, so the chip does not throttle from heat.
Handheld PCs such as the Steam Deck or ROG Ally are low-power devices built for portable play. They are best run at lower resolutions and lower presets, and their performance is well below a desktop. Use the official requirements as a reference point and expect to lower settings considerably. FrameScope has no Steam Deck verification data for this game, so this is general guidance only and not a compatibility rating.
If you plan to play on a handheld, a larger SSD is worth having, and starting from low presets with upscaling enabled tends to give a steadier experience.
Storage and memory
The official minimum is 8 GB of RAM and the recommended is 16 GB. Sixteen gigabytes lets the game run alongside Windows, a browser and other background programs without frequent memory pressure. Running two sticks in dual-channel mode also gives better memory bandwidth, which helps overall performance.
The listed storage requirement is 75 GB, but it is wise to leave extra room for patches and any later additions. The publisher does not require an SSD, so a hard drive will work. An SSD does noticeably shorten loading times and makes moving between areas smoother, so it is worth using one if you can.
If your budget allows, 16 GB of dual-channel RAM and an SSD with enough capacity for the game are the upgrades you are most likely to notice.