PC SYSTEM REQUIREMENTS & GUIDE

Asleep: Act 1

This page was drafted with AI assistance from our structured data, passed automated quality checks and is spot-checked by our editor · Last checked: November 14, 2026

Use light to survive a nightmare: each creature reacts differently to it. Explore, solve puzzles, and evade the horrors in the dark. You are in the skin of Ana Lúcia.

Asleep: Act 1 cover art
HARDWARE GUIDE

Asleep: Act 1 PC Hardware Guide

Official requirements explained

The official minimum for Asleep: Act 1 lists an Intel Core i3 M380 processor, an Intel HD 4000 graphics chip, 1 GB of RAM and 1 GB of storage. The i3 M380 is a laptop processor from more than a decade ago, and the HD 4000 is an early integrated graphics chip from Intel's third generation. By today's standards, that is very old hardware. The game can run on it mainly because its rendering and system load are light.

The official recommended section lists only storage, at 2 GB. The publisher did not list recommended levels for the processor, graphics, or RAM, so the official numbers alone cannot tell you what a recommended-level machine looks like. Using FrameScope's tier comparisons as a rough guide, the minimum graphics chip is roughly comparable to an Intel HD Graphics 4000. The recommended graphics comparison is an Intel HD Graphics 630. The minimum processor is roughly comparable to an AMD A10-7850K, and the recommended processor comparison is an Intel Core i5-4570. These are estimates of tier, not performance results.

For a player, the gap between minimum and recommended mostly comes down to the generation of the graphics chip and processor. If your PC only reaches the minimum, the game should start, but you will have less room for higher settings, so plan on running at low quality.

Recommended builds for three budgets

The entry build suits players who want to spend less and are happy with modest graphics. The graphics cards we list at this level are the AMD Radeon RX 6500 XT, Intel Arc A380, NVIDIA GeForce GTX 1650 4GB, GTX 1650 Super, GTX 1660 and RTX 3050 6GB. Processors include the AMD Ryzen 3 3100, Intel Core i3-10100F and Ryzen 5 3500. All of these reach the official recommended tier. Pair them with 16 GB of RAM, and keep graphics settings moderate on cards with smaller video memory.

The mainstream build suits players who want a steadier and more balanced experience. The graphics choices overlap with the entry tier and add the GTX 1660 Super and RTX 3050 8GB. Processors include the Intel Core i5-10400F and i5-10400. Again, 16 GB of RAM is the baseline. This tier has more headroom above the recommended level, which makes it easier to keep shadows and lighting at medium to high.

The high-end build uses the AMD Radeon RX 9070 XT, NVIDIA GeForce RTX 5070 Ti, RX 7900 XTX, RTX 5080, RTX 4090 and RTX 5090, with processors such as the Ryzen 9 9950X and Ryzen 7 9800X3D. Every part in this group reaches the recommended tier in our comparisons. For this game, the main benefit of high-end hardware is more room for high settings and long-term headroom, not necessity. Plan on 32 GB of RAM if you want extra margin, and 16 GB remains the baseline.

Graphics settings with the biggest impact

In a game built around exploration, puzzles and stealth, the settings that usually cost the most are shadows, volumetric lighting and general lighting effects. The core mechanic is using light against monsters, so the lighting and shadow calculations take up a lot of the workload. If your graphics card is under strain, lowering shadow quality and volumetric lighting first usually gives the clearest improvement, and the effect on sharpness and atmosphere is smaller.

Ray tracing, if the game offers it, is generally a costly option too. Unless your graphics card has plenty of spare capacity, it is best left off so the GPU can spend its effort on shadows and the scene itself. View distance and the number of detail objects in a scene are also common sources of load. Levels in this kind of game are usually not huge, so a medium-high view distance with detail settings one or two steps down is usually enough.

Upscaling technologies such as DLSS, FSR and XeSS generally render the image at a lower internal resolution and then scale it up to the output resolution. If your graphics card supports one, enabling it can reduce the GPU's workload without a big visible loss, which is especially useful on mid-range and entry cards. Whether it is available depends on the game and your hardware.

Laptops and handheld PCs

Laptop graphics cards often carry the same names as desktop parts, such as an RTX 3050 or GTX 1650. Laptop versions usually have lower power limits and tighter cooling, so their real performance is often below the desktop card of the same name. When buying or comparing, check the model suffix and power specifications rather than only the name. During long sessions, poor cooling can also cause the system to throttle, which makes performance less consistent.

Handheld PCs such as the Steam Deck or ROG Ally are general-purpose portable computers, and they are optimized mainly around power efficiency and adjustable power limits. Their performance depends on the built-in processor and graphics unit. Lower the graphics quality and resolution, and use the system's performance and power settings. We have no verification data for this game on handhelds, so we cannot give a specific handheld rating. The general advice above is what we can offer.

If you plan to play on a laptop or handheld, keep the device in a well-ventilated place and plug in the power, so battery-saving modes do not limit performance.

Storage and memory

For memory, the official minimum is 1 GB, but modern operating systems and background software use a lot of RAM on their own, so we recommend 16 GB in practice. Dual-channel memory gives better bandwidth. If you have two memory sticks, make sure they are in the correct slots so they run in dual-channel mode.

For storage, the official recommendation is 2 GB and the minimum is 1 GB. In practice, leave more room than the official figures suggest, because updates, save files and cache files take extra space. As a rough rule of thumb, keeping a dozen or so gigabytes free for this game is comfortable. That is our estimate, not official data.

The publisher does not require a solid-state drive, but a traditional hard disk will make level loading and scene transitions noticeably slower. An SSD mainly shortens load times and reduces stutter when moving between areas, which is a practical upgrade for smoother play.

BUILD SUGGESTIONS

Builds for Three Budgets

TierGraphics cardProcessorRAMWhy
EntryNVIDIA GeForce GTX 1650 4GBAMD Ryzen 5 350016 GBThis combination still has headroom above the official recommended tier and suits players on a budget who are happy with low to medium graphics. The GTX 1650 has limited video memory, so avoid pushing the settings too high.
MainstreamNVIDIA GeForce GTX 1660 SuperIntel Core i5-10400F16 GBThis build also reaches the recommended tier and leaves more room for shadows and lighting, which suits players who want balanced graphics. 16 GB of RAM keeps the system and game running smoothly.
HighNVIDIA GeForce RTX 5070 TiAMD Ryzen 7 9800X3D32 GBEvery part in this build reaches the recommended tier in our comparisons, leaving plenty of room for high settings and future headroom. For this game, high-end hardware is not necessary, but it suits players who want to stay at a high spec over the long term.

Builds are chosen against the official minimum and recommended requirements and our hardware tiers; they are estimates, not measured FPS.

OFFICIAL REQUIREMENT GUIDE

Understanding System Requirements for Asleep: Act 1

Comparing minimum versus recommended specifications highlights whether upcoming upgrades should target graphics horsepower, processor threads, RAM capacity, or SSD storage.

MINIMUMMinimum Requirements (official)
Graphics Card (GPU)
Intel HD 4000
Processor (CPU)
Intel Core i3 M380
Memory (RAM)
1 GB
Storage Space
1 GB

The lowest hardware the publisher supports for launching and playing the game; not the same as a good experience.

RAM Delta

RAM requirement is identical; GPU and CPU will be the primary performance differentiators.

Storage Drive

SSD is optional according to official specs, but highly recommended for fast loading.

Evaluation Method

GPU, CPU, VRAM, RAM, and storage are evaluated independently; overall verdict is bounded by the bottleneck.

HARDWARE REQUIREMENT TIERS

Representative Hardware Baselines

The hardware models below are mapped against the official minimum and recommended tiers for quick reference. This is a requirement comparison, not a resolution or FPS promise.

CHECK YOUR SPECS

Can Your PC Run Asleep: Act 1?

Select your GPU, CPU, and RAM to evaluate your exact compatibility level against official tiers.

FAQ

Frequently Asked Questions

Can a PC that only meets the official minimum run this game?

The official minimum lists an Intel Core i3 M380 processor, an Intel HD 4000 graphics chip and 1 GB of RAM. Those parts are very old, and the game can run on them mainly because its rendering load is light. If your PC only reaches the minimum, play at low quality and expect limited room for higher settings.

Is my older graphics card enough?

Using FrameScope's tier comparisons, the minimum graphics chip is roughly comparable to an Intel HD Graphics 4000, and the recommended comparison is an Intel HD Graphics 630. If your card falls below the recommended comparison, lower the graphics quality and aim for the game starting and running stably. We have no measured results, so we cannot guarantee a specific experience.

How much RAM do I need?

The official minimum is 1 GB, but modern systems use a lot of memory on their own. We recommend 16 GB, with the two sticks running in dual-channel mode, so both the system and the game run more smoothly.

Do I need an SSD?

The publisher does not require one. However, a hard disk makes level loading and scene transitions noticeably slower. An SSD mainly improves load times and stutter, which makes a real difference to the overall experience.

Can I play on a laptop?

Yes, but laptop versions of graphics cards usually have lower power limits and worse cooling than desktop cards with the same name, so real performance is often lower. Choose a model with good cooling and keep it plugged in to avoid throttling.

Which settings should I lower first?

Shadows, volumetric lighting and general lighting effects usually cost the most, because the core mechanic is using light against monsters. If your graphics card is struggling, lowering these first usually gives the clearest improvement while keeping sharpness mostly intact.