Yet Another Zombie Survivors PC Hardware Guide
Official requirements explained
The official minimum for Yet Another Zombie Survivors lists an Intel Core i5-4670K (or similar) CPU, a GeForce GTX 970 (or better) graphics card, 8 GB of RAM and 6.35 GB of storage. By today's standards the i5-4670K is a very old entry-level processor, and the GTX 970 is an early entry-level card. In plain terms, the minimum bar is low, which tells you this game is not especially demanding.
The official recommended spec is an AMD Ryzen 5 3600 (or similar) CPU, a GeForce RTX 2060 (or better) graphics card, the same 8 GB of RAM and 6.35 GB of storage. The Ryzen 5 3600 sits roughly in the modern mainstream band, and the RTX 2060 is close to a mainstream 1080p-class card. The gap between minimum and recommended is mostly a generational one in the CPU and GPU. Recommended-tier hardware gives more headroom when the screen fills with enemies, so it is less likely to stutter late in a run. Note that the publisher does not publish any performance figures; this comparison is based only on requirement tiers.
For memory, both levels list 8 GB. Once the operating system and background apps take their share, we would still suggest 16 GB for comfortable play, especially if you stream or switch windows often. Storage is not a concern at 6.35 GB, and the requirements state that an SSD is not required.
Recommended builds for three budgets
The entry build suits players on a tight budget or with an older system. Look at cards such as the GTX 1650 Super, GTX 1660 or RTX 3050, paired with a CPU like the Ryzen 3 3100 or Core i3-10100F, and 16 GB of RAM. This gives you comfortable headroom above the official minimum and suits players willing to run at moderate settings.
The mainstream build is the sweet spot for most players. Cards like the GTX 1660 Super, RTX 3050 8GB or RTX 2060 12GB pair well with CPUs such as the Ryzen 5 3600 or Core i5-11400F. This tier lines up with the official recommended spec and is a common setup for 1080p play. Again, 16 GB of RAM is the sensible choice.
The high-end build is for players who want high settings, extra headroom for the future, or who multitask with streaming and recording. Cards such as the RTX 5070 Ti or RX 9070 XT and CPUs such as the Ryzen 7 5800X3D or Core i5-13600K fit here. For this game the advantage is margin and multitasking rather than chasing big numbers. Start with 16 GB of RAM and consider 32 GB if you run heavy background workloads.
Graphics settings with the biggest impact
In games of this type, the settings that usually cost the most are shadow quality, volumetric lighting and fog, crowd and simulation density, and view distance. Crowd and simulation density controls how many enemies appear on screen at once, which matters a lot in a horde-based game. If your hardware is around the recommended tier, start these at medium and raise them carefully.
Ray tracing is usually one of the most expensive options. In a fast action game, its visual gains are small compared with keeping the action smooth, so unless you have a high-end card, leave it off and keep the resources for combat. Anti-aliasing and post-processing can usually be set to medium without much loss.
If the game offers DLSS, FSR or XeSS, enable the one your graphics card supports. These techniques render at a lower internal resolution and reconstruct a sharper image, trading a small amount of image quality for extra performance headroom. Results vary by technology and setting, so compare the image yourself before deciding.
Laptops and handheld PCs
A laptop GPU shares its name with a desktop card but usually runs with lower power limits (TGP) and tighter cooling, so its real performance can be noticeably lower. When buying a laptop, check the model's power configuration and cooling design rather than trusting the name alone. For smooth play, plug in the charger and make sure the fans and vents are clear to avoid thermal throttling during long sessions.
Handheld PCs such as the Steam Deck or ROG Ally are portable Windows or Linux machines with power-limited GPUs and CPUs. They are best run at lower resolutions and moderate settings, often with an upscaling technique enabled. We do not have verified handheld data for this game, so we cannot give a compatibility rating. Start with low to medium settings and adjust from there based on how it actually plays on your device.
Storage and memory
Both official levels list 8 GB of RAM, but once the operating system, browser and background apps are counted, 16 GB is the comfortable choice for play. Dual-channel memory, with two sticks installed in the correct slots, gives better bandwidth, which helps in CPU-heavy scenes with many enemies.
For storage, the requirement is about 6.35 GB, so capacity is not a problem. An SSD is not required, but it shortens load times and reduces waiting when entering areas. The game will run from a hard drive as well, just with slower loading.
Finally, updates need temporary space, so keep some free room on the install drive instead of filling it nearly to capacity. That keeps installs and patches running smoothly.