Yakuza: Like a Dragon PC Hardware Guide
Official requirements explained
The official minimum lists an Intel Core i5-3470 or AMD FX-8350 for the processor, an Nvidia GeForce GTX 660 with 2 GB or an AMD Radeon HD 7870 with 2 GB for the graphics card, 8 GB of RAM, and 40 GB of storage. An SSD is not required. By today's standards these parts sit at the very old entry level, so the game will launch on them, but the experience will be limited by the age of the hardware.
The official recommended tier lists an Intel Core i7-6700 or AMD Ryzen 5 1400 for the processor, an Nvidia GeForce GTX 1060 3 GB or AMD Radeon RX 580 4 GB for the graphics card, 8 GB of RAM, and 60 GB of storage. The recommended GPUs are roughly in the older entry band, and the CPUs are also at the entry level. The gap between minimum and recommended is mostly about graphics card generation and VRAM, while the RAM figure stays the same.
The publisher does not list a higher tier, so if you want clearly smoother play you will need to look at the build suggestions below. Note that 8 GB of RAM is tight on current systems, which is covered in the storage and memory section.
Recommended builds for three budgets
The entry build suits players on a tight budget who want to start from the official recommended level. Pair an Nvidia GeForce GTX 1650 4GB or RTX 3050 6GB with a four-core CPU such as an AMD Ryzen 3 3100 or Intel Core i3-10100F, and go to 16 GB of RAM. This setup comfortably clears the recommended tier, but you will need to lower some effects if you want headroom at higher resolutions.
The mainstream build suits players who want long sessions at 1080p with more of the full visual quality intact. The GPU can be an Nvidia GeForce GTX 1660 Super, RTX 3050 8GB, or AMD Radeon RX 5600 XT, and the CPU an AMD Ryzen 5 3600 or Intel Core i5-10400. This tier leaves a clear margin above the official recommended requirements and is the choice most players will be happiest with, again with 16 GB of RAM.
The high-end build suits players who want higher resolutions, more effects, or a setup that stays comfortable for the next few years. Look at an Nvidia GeForce RTX 3060 Ti, RTX 4060, or AMD Radeon RX 6700 XT, paired with a CPU such as an AMD Ryzen 5 5600 or Ryzen 7 5700X. This tier sits well above the official recommended level and copes better with later updates or mods. 16 GB of RAM is the baseline, and more headroom helps if you record or multitask.
Graphics settings with the biggest impact
In an action RPG like this, the settings that usually cost the most are shadow quality, volumetric lighting and fog, depth of field, reflections, and the density of crowds or simulated objects. Shadows and reflections tend to be the heaviest, so lowering them to medium first is a good start. The visual difference is often small, while the performance gain can be considerable.
View distance and detail level control how much distant geometry and objects the game loads. If your graphics memory runs short, lowering these is an effective way to avoid stutter. Anti-aliasing and the main texture detail are worth keeping, since they have the most direct effect on sharpness and surface quality for a relatively modest cost.
If your graphics card supports DLSS, FSR, or XeSS, enabling an upscaler at medium-high settings is a practical way to get smoother play. The upscaler renders at a lower internal resolution and reconstructs the image. Quality modes usually look close to native, making them a good first choice. Ray tracing, where offered, is generally not worth enabling on entry or mainstream hardware and is better saved for high-end cards.
Laptops and handheld PCs
Laptop graphics chips often share a name with desktop cards, such as an RTX 3060 laptop version, but their power limits and cooling are usually much lower, so they perform noticeably below the desktop card of the same name. Check the manufacturer's stated power and cooling design rather than relying on the model name alone. Sustained full load can also cause thermal throttling, which makes frame pacing uneven.
Handheld PCs such as the Steam Deck or ROG Ally are low-power platforms and generally sit below the entry tier in raw capability. Play at a lower resolution with low to medium settings, and use the built-in frame cap or dynamic performance features to extend battery life and reduce heat. FrameScope has no verified data for this game on handheld devices, so treat this as general guidance only.
When using a laptop, plug it in and select the high-performance power profile. An external monitor and stable power supply usually give more consistent results.
Storage and memory
For memory, both the minimum and recommended listings say 8 GB, but on current systems 16 GB gives the operating system and background programs enough room and reduces memory-related stutter. Dual-channel configuration, such as two 8 GB or two 16 GB sticks in the correct slots, provides better bandwidth, which matters most for systems relying on integrated graphics or weaker discrete cards.
For storage, the official minimum is 40 GB and the recommended is 60 GB. Installed size can grow with updates or extra content, so keep at least 80 GB free. An SSD is not required, but installing on an SSD noticeably shortens loading times and reduces waits during scene transitions. A traditional HDD will run the game, but it is more prone to stutter and long loads when streaming large amounts of data.
Finally, keep some free drive space and update your graphics drivers regularly to avoid problems caused by low storage or outdated drivers.