They Are Billions PC Hardware Guide
Official requirements explained
The official minimum asks for an Intel or AMD processor with two cores running at about 2 GHz. On our tier scale that corresponds roughly to an Intel Core 2 Duo E8400, which is a very old entry-level chip, but it is enough to run the game's basic workload.
For graphics, the minimum is an Intel HD 3000, a Radeon or an NVIDIA card with Shader Model 3 support and 1GB of video memory. On our scale, Intel HD Graphics 4000 sits in that area, which is legacy integrated graphics territory. The game will start on this class of hardware, but you should expect to lower the picture and view range considerably.
The recommended tier raises the bar to a four-core processor at about 3 GHz, a Radeon 7950 or GTX 670 or better, and 4GB of video memory. The recommended CPU roughly matches an Intel Core i3-4130, and the recommended GPU roughly matches a GTX 1050 Ti, both at the legacy-to-entry end of the scale. The gap between minimum and recommended is mostly about graphics power and video memory. RAM rises from 4GB to 8GB, and the storage requirement is 4GB at both levels. The publisher does not require an SSD, so a traditional hard drive is fine.
Recommended builds for three budgets
The entry build suits players on a tight budget who are willing to lower their settings. It pairs an AMD Radeon RX 6500 XT with an AMD Ryzen 3 3100 and 16GB of RAM. The RX 6500 XT meets the official recommended tier, so most settings should run smoothly, and the Ryzen 3 3100 is well above the recommended CPU, so the processor will not be the bottleneck.
The mainstream build suits players who want comfortable settings across the board without spending a lot. The graphics card is the same as in the entry build, but the processor becomes an Intel Core i5-10400F, which leaves more headroom when many units are on screen. 16GB of RAM is again plenty for the game and background programs.
The high-end build suits players who want higher resolutions or who stream while playing. The Intel Arc A770 16GB and the Intel Core i5-12400 both sit well above the official recommended tier, and the graphics card carries generous video memory. This build comes with 32GB of RAM, which helps during long sessions with large zombie hordes and keeps multitasking smooth.
Each part is described at its actual position relative to the official requirements: parts that meet the recommended tier will run the game well, while parts that are well above it leave comfortable margin.
Graphics settings with the biggest impact
In a large-scale strategy game with hordes of zombies and many units on screen, the settings that usually cost the most are simulation density, shadows, volumetrics and view distance. Simulation density and unit count load the processor directly, so even a strong graphics card can stutter if the CPU is the limit. If you see that pattern, check the settings tied to the processor first.
Shadows and volumetric effects mainly use graphics compute and video memory. Keeping them at medium or low usually still leaves the units and terrain easy to read, so there is no need to push everything to the maximum. View distance increases the amount of scenery that must be drawn, and lowering it often gives a clear improvement.
Ray tracing, if the game offers it, tends to be expensive, and we would not enable it on the entry or mainstream builds. Upscaling technologies such as DLSS, FSR and XeSS generally render at a lower internal resolution and then scale the image up, trading a little sharpness for extra performance; they are worth using when supported. Anti-aliasing costs vary with resolution and method, so at higher resolutions you can reduce it moderately and give the budget to shadows and simulation instead.
Laptops and handheld PCs
Laptop graphics chips often carry the same name as desktop parts, but their real performance depends on power limits and cooling. A laptop version of a GTX 1650 is usually slower than its desktop counterpart, so judge a laptop by its actual specifications rather than the model name. Keep the machine plugged in and set it to a high-performance power mode so the GPU and CPU can sustain their best clocks.
Handheld PCs such as the Steam Deck or ROG Ally are general portable devices, and their performance and thermals are constrained by battery and power budgets. The game's minimum requirements are not demanding, but on a handheld it is sensible to start with low settings and a reduced resolution, and to keep the vents clear. We have no Steam Deck verification data for this title, so this is general guidance only.
Storage and memory
For memory, the official minimum is 4GB and the recommended amount is 8GB. Running two matching modules in dual-channel mode provides more bandwidth than a single module, which helps when the game processes large numbers of units. 16GB is the common desktop choice today and is enough for this game alongside typical background programs.
For storage, the official requirement is 4GB. The publisher does not require an SSD, so a traditional hard drive will work, but an SSD noticeably shortens the wait when loading saves and switching scenes. Beyond the installation itself, leave some extra space free for patches and save files so that a full drive does not cause problems.
