The Last Spell PC Hardware Guide
Official requirements explained
The Last Spell lists a minimum of an Intel Core i5-3470 or AMD FX-8370 for the processor, paired with an NVIDIA GeForce GTX 650 (2 GB) or AMD Radeon HD 7770 (2 GB) for the graphics card, 4 GB of RAM and 2 GB of storage. In our tier comparison, the minimum CPU sits roughly at the AMD FX-8350 level, which is an older entry-level part. The minimum GPU is close to a GeForce GT 1030 class card, which is also an old low-end option.
The recommended tier is an Intel Core i5-8400 or AMD Ryzen 5 2600, a GeForce GTX 660 (2 GB) or Radeon HD 7870 (2 GB), 8 GB of RAM and the same 2 GB of storage. The recommended CPU is roughly comparable to a Ryzen 3 3100, which is a mainstream part from an earlier generation, and the recommended GPU is close to a Radeon HD 7850. Going from minimum to recommended mostly means a stronger processor and more memory, while the graphics generation changes less. The overall takeaway is that this game asks for fairly modest hardware.
The publisher does not require an SSD at either level, so a standard hard drive will work. The listing only gives these two levels and does not describe higher-end setups, so if you want to play at higher settings, use the build suggestions below as a guide.
No other official levels were listed beyond these two.
Recommended builds for three budgets
The entry build suits players who want to spend less and still have a smooth experience. Pair a GeForce GTX 1650 4GB or GTX 1660 with a Ryzen 3 3100 or Core i3-10100F and 16 GB of RAM. This combination is well above the official recommended tier and should handle medium settings comfortably.
The mainstream build is the sensible choice for most players who want smooth play with some room to upgrade. An RTX 3050 8GB or GTX 1660 Super paired with a Ryzen 5 3600 or Core i5-10400, plus 16 GB of RAM, gives you enough headroom to raise settings without worrying much about VRAM.
The high build is for players who want higher resolutions or heavier effects, or who want a PC that also handles newer games. An RTX 4060 or RX 7600 with a Ryzen 7 5700X or Core i5-14400 and at least 16 GB of RAM goes far beyond the official recommended level and should keep you covered for years.
Graphics settings with the biggest impact
In a combat RPG full of enemies and skill effects like this one, the settings that usually cost the most are shadow quality, volumetric effects and particles, along with how many units and how dense the simulation is on screen. Shadows and volumetrics are heavy during night battles, so lowering them is often the biggest single gain with the smallest visual loss. A very long view distance also adds rendering work and can be trimmed.
If your card supports ray tracing, this game does not particularly need it, so turn it off for steadier performance. Texture quality usually has a small performance cost as long as you have enough VRAM, so you can keep it high. Texture and shadow resolution should be matched to your video memory, and cards with limited VRAM should avoid maxing both at once.
If your GPU supports DLSS, FSR or XeSS, you can enable upscaling at medium to high quality. In general terms, these technologies render at a lower internal resolution and reconstruct a sharper image, which often adds performance with little visible difference. The exact quality varies by technology and setting, so compare them yourself.
Laptops and handheld PCs
Laptop graphics chips often share names with desktop cards, such as an RTX 4060 laptop version, but their power limits and cooling are usually lower, so they perform noticeably behind the desktop model. When choosing a laptop, check the GPU's power limit (TGP) rather than just the model name. While gaming, plug in the power adapter and use the high-performance mode, or the system may throttle.
Handheld PCs such as the Steam Deck or ROG Ally are low-power platforms that can run this kind of game, but you will need lower graphics settings and resolution. Use the built-in frame limiter and scaling options to balance battery life and heat. We have no Steam Deck verification data, so we cannot give a compatibility rating for it; judge it against the official requirements and the device's specs.
In short, handhelds and entry-level laptops are best played at lower settings, and if you want a better experience, a desktop or an external monitor and power setup is more reliable.
Storage and memory
The official minimum RAM is 4 GB and the recommended is 8 GB. Allowing for the operating system and background programs, we recommend at least 16 GB in practice, which leaves room to switch apps or stream while playing. Dual-channel memory, such as two 8 GB sticks, also gives better bandwidth than a single module and helps overall performance.
The listed storage requirement is 2 GB, which is small for a modern drive and should not be a burden. The publisher does not require an SSD, but an SSD noticeably shortens load and read times, which is most useful if you restart often or move between areas frequently. If your budget allows, install the game on an SSD.
Finally, keep some free space on your drive for updates and temporary files. Updates can fail or performance can drop when a drive is nearly full, so keeping a comfortable amount of free space is the safer choice.