Tell Me Why PC Hardware Guide
Official requirements explained
The official minimum asks for an Intel Core i3-4130 or AMD FX-4300 class processor, a graphics card such as the GTX 750 Ti, GTX 1050, Radeon R7 260X or RX 560, 4GB of memory and 25GB of storage. By today's standards these are very old entry-level parts. The processor is roughly comparable to an AMD A10-7850K, and the graphics cards sit around the GT 1030 level. The game will start, but expect to lower settings to keep it looking and running acceptably.
The official recommended tier asks for an Intel Core i5-4570 or AMD Ryzen 3 1300X, a graphics card such as the GTX 970, GTX 1060, Radeon R9 290X or RX 480, 8GB of memory and the same 25GB of storage. The recommended processor sits around the Core i5-4570 level, and the recommended graphics cards are roughly a GTX 1060 3GB class part. The gap between minimum and recommended is mainly in graphics power and memory, and that gap is what lets you play at higher settings without constant compromise.
The publisher does not require an SSD, so a solid-state drive is not a hard requirement, though we still recommend one below.
Recommended builds for three budgets
The entry build pairs an NVIDIA GeForce GTX 1650 Super with an AMD Ryzen 3 3100 and 16GB of memory. The GTX 1650 Super meets the official recommended tier, and the Ryzen 3 3100 is comfortably beyond the recommended processor level. It is a practical choice if money is tight and you want to play at recommended settings. If your budget is smaller still, a GTX 1650 4GB, Radeon RX 6500 XT or Arc A380 only meets the official minimum. You will need to lower settings to keep things smooth, so treat these as a floor rather than an ideal.
The mainstream build uses an NVIDIA GeForce RTX 3050 6GB with an AMD Ryzen 5 3500X and 16GB of memory. The RTX 3050 6GB is well above the recommended graphics tier and the processor is also well beyond its recommended counterpart. This suits players who want higher settings and a steadier experience, with room left over for other programs.
The high-end build combines an NVIDIA GeForce RTX 3060 Ti with an AMD Ryzen 5 5600 and 32GB of memory. Both parts are far beyond the official recommended tier, which makes this more than enough for this game. It is aimed at players who want maximum settings at higher resolutions, or who stream and record while playing. For this title a high-end build is not necessary, but it gives you plenty of headroom.
Graphics settings with the biggest impact
In adventure games driven by dialogue and exploration, the settings that usually cost the most are shadow quality and shadow distance, followed by volumetric fog and volumetric lighting. Shadows often look less different than people expect, so lowering them is usually the most efficient change and has little effect on the story experience. Volumetric effects are another good place to start cutting.
Ray tracing adds a noticeable load to the graphics card. If your card is limited, it is best to turn it off and spend your resources on resolution and textures. Texture quality mainly depends on video memory (VRAM), so on a card with less VRAM, lowering textures helps more than lowering most other options.
Upscaling technologies such as DLSS, FSR and XeSS render the game at a lower resolution and let an algorithm scale the image up. If your graphics card supports one, enabling it can reduce the load with little visible loss in image quality. The actual result depends on your card and settings, so compare the image yourself before deciding.
Laptops and handheld PCs
Laptop graphics chips often share names with desktop parts, such as a GTX 1650 or RTX 3050, but they usually perform noticeably lower. The reason is tighter power limits and cooling in a thin chassis, and each manufacturer sets its own power target. When checking a laptop, look at the graphics power setting (TGP) and cooling design rather than just the model name. If the machine throttles or runs very hot during play, use a performance mode and make sure the vents are clear.
Handheld PCs such as the Steam Deck or ROG Ally are low-power portable platforms. We do not have Steam Deck verification data for this game, so we cannot give a specific compatibility rating. In general, lighter games like this one are usually playable on handhelds, but lower the resolution and settings, and keep battery life and heat in mind.
Storage and memory
The official minimum is 4GB of memory and the recommended tier is 8GB. In practice we suggest at least 16GB so the system and background programs have room and the game runs more smoothly. If your budget allows, 32GB gives extra breathing space, especially if you stream or keep other software open. When installing memory, use dual-channel mode by placing the sticks in the matching slots. This raises memory bandwidth and matters most on systems that rely on integrated graphics or an APU.
The official storage requirement is 25GB. After installation, updates and temporary files add to that, so keep at least 40GB free to avoid running out of space during an install or patch.
An SSD is not required, but it shortens loading and makes scene changes and save loading quicker. If your budget allows, install the game on an SSD. An HDD will still run the game, only with longer load times.
