PC SYSTEM REQUIREMENTS & GUIDE

Teardown

This page was drafted with AI assistance from our structured data, passed automated quality checks and is spot-checked by our editor · Last checked: November 14, 2026

Prepare the perfect heist in a fully destructible, simulated voxel world. Tear down walls with vehicles or use explosives to create your own shortcuts. Shape the environment to your advantage in the most creative ways you can imagine. Play solo or with up to 12 players in multiplayer.

Teardown cover art
HARDWARE GUIDE

Teardown PC Hardware Guide

Official requirements explained

The official minimum for Teardown calls for a quad-core CPU, an NVIDIA GeForce GTX 1060 or equivalent with 4 GB of VRAM, 8 GB of RAM and 12 GB of storage. By today's standards, the GTX 1060 sits in the older entry tier, and the CPU is listed only as a generic quad-core with no specific model, so any modern quad-core is a reasonable starting point.

The official recommended level asks for an Intel Core i7 or better, an NVIDIA GeForce GTX 1080 or equivalent with 4 GB of VRAM, 8 GB of RAM and 12 GB of storage. Against FrameScope's tier references, the GTX 1080 falls around the entry gaming tier, and the Core i7 entry is vague because no generation is named. In practice, the recommended level raises the bar mainly for the graphics card, while memory and storage stay the same.

The publisher does not require an SSD, so a traditional hard drive is acceptable under the official listing. Both levels list 8 GB of RAM, but for comfortable everyday use with a browser and background software, 16 GB is the amount I would plan for. That advice goes a little beyond the official text and reflects general experience rather than the listing.

Recommended builds for three budgets

The entry build pairs a GTX 1650 Super, GTX 1660 or RTX 3050 with a mid-range CPU such as the Ryzen 3 3100 or Ryzen 5 3500, and 16 GB of RAM. The graphics card here meets only the official minimum, which means the game will run, but you should expect to lower settings to keep performance steady. The CPU, by contrast, sits well above the recommended level.

The mainstream build uses an Arc A580, RTX 2060, RX 5700 or RX 6600, paired with a CPU from the Ryzen 3 3100 to Ryzen 5 4500 range or a Core i5-10400, again with 16 GB of RAM. This graphics tier meets the official recommended level, so it suits players who want something close to the recommended experience. The processor is also well above the recommended level, so it is unlikely to be the bottleneck.

The high-end build uses an RX 6800, RTX 3080, RX 7700 XT or RTX 5060 Ti with a Core i5-12400, Ryzen 5 5600 or Ryzen 9 3900X, and 32 GB of RAM is a sensible choice. Both parts are well above the recommended level, which makes this build a good fit for higher resolutions, extra visual effects, or running streaming software alongside the game.

Graphics settings with the biggest impact

Teardown simulates a large amount of voxel destruction and physics, so the settings that cost the most are usually not texture quality but the lighting-related options: shadows, volumetric effects and ray tracing. Volumetrics and shadows are especially demanding in scenes with many destructible structures, so lowering these first is usually the most effective move, followed by view distance.

If the game offers ray tracing, it is generally one of the most expensive settings, and on mid-range cards it is worth leaving off in exchange for a steadier frame rate. Texture quality, by contrast, mainly draws on video memory rather than processing power, so if your card has enough VRAM you can usually keep it high.

Upscaling technologies such as DLSS, FSR and XeSS render at a lower internal resolution and scale the image up, which can relieve a lot of GPU load at the cost of some fine detail. If your card supports one of them, a quality mode is usually a good compromise. For anti-aliasing on mid-range hardware, pick a lighter option so smoother edges do not cost you too much performance.

Laptops and handheld PCs

Laptop graphics chips often share names with desktop cards, such as an RTX 3060 laptop version, but power limits and cooling space usually mean lower real performance. When judging a laptop, look at its configured power limit (TGP) and cooling design rather than the model name alone. Keeping the machine plugged in and using a high-performance power mode also helps it reach its full potential.

Handheld PCs such as the Steam Deck or ROG Ally use low-power integrated graphics. The official listing does not address handhelds, so the general advice is to run the game at a lower resolution and modest settings, and to use the built-in scaling and frame-rate limiting tools to keep battery life and temperatures reasonable. We do not have Steam Deck verification data, so no compatibility rating is given here.

Storage and memory

The official storage requirement is 12 GB, but it is wise to leave extra room for updates and temporary files. For memory, both official levels list 8 GB, though 16 GB gives more headroom once the operating system and background programs are counted. If you go for 32 GB, make sure your motherboard supports dual-channel operation and that the modules are in the recommended slots so you actually get the bandwidth benefit.

The publisher does not require an SSD, so the game can run from a traditional hard drive. An SSD, however, noticeably shortens load and streaming times, which matters in a game that loads and reshapes scenes often, so it is worth installing on one if you can. Finally, keep at least about ten percent of your drive free so updates do not fail for lack of space.

BUILD SUGGESTIONS

Builds for Three Budgets

TierGraphics cardProcessorRAMWhy
EntryNVIDIA GeForce GTX 1660 SuperAMD Ryzen 5 350016 GBThis build suits players on a tight budget who mainly want the game to run smoothly. The graphics card only meets the official minimum, so settings will need lowering, while the CPU is well above the recommended level.
MainstreamNVIDIA GeForce RTX 3060 8GBIntel Core i5-1040016 GBThe graphics card meets the official recommended level, so you can play close to the intended experience, and the CPU is well above the recommended level too. It is a balanced choice for most players.
HighNVIDIA GeForce RTX 5060 Ti 16GBAMD Ryzen 5 560032 GBBoth parts are well above the recommended level, which suits players chasing higher resolutions, full visual effects, or streaming while playing. The 32 GB of RAM gives extra room for heavier multitasking.

Builds are chosen against the official minimum and recommended requirements and our hardware tiers; they are estimates, not measured FPS.

OFFICIAL REQUIREMENT GUIDE

Understanding System Requirements for Teardown

Comparing minimum versus recommended specifications highlights whether upcoming upgrades should target graphics horsepower, processor threads, RAM capacity, or SSD storage.

MINIMUMMinimum Requirements (official)
Graphics Card (GPU)
NVIDIA GeForce GTX 1060 or similar. 4 Gb VRAM.
Processor (CPU)
Quad Core CPU
Memory (RAM)
8 GB
Storage Space
12 GB

The lowest hardware the publisher supports for launching and playing the game; not the same as a good experience.

RAM Delta

RAM requirement is identical; GPU and CPU will be the primary performance differentiators.

Storage Drive

SSD is optional according to official specs, but highly recommended for fast loading.

Evaluation Method

GPU, CPU, VRAM, RAM, and storage are evaluated independently; overall verdict is bounded by the bottleneck.

HARDWARE REQUIREMENT TIERS

Representative Hardware Baselines

The hardware models below are mapped against the official minimum and recommended tiers for quick reference. This is a requirement comparison, not a resolution or FPS promise.

CHECK YOUR SPECS

Can Your PC Run Teardown?

Select your GPU, CPU, and RAM to evaluate your exact compatibility level against official tiers.

FAQ

Frequently Asked Questions

Will the official minimum graphics card run Teardown?

The official minimum is a GTX 1060 or equivalent with 4 GB of VRAM. By our tier references that sits in the older entry range, so the game will start, but you should lower settings to keep performance stable.

Does my graphics card meet the recommended level?

The official recommended level is a GTX 1080 or equivalent, which falls around the entry gaming tier. If your card is at that level or higher, it meets the recommendation; if it is below, you will need to reduce settings accordingly.

Is 8 GB of RAM enough?

Both official levels list 8 GB, so the number technically meets the listing. In practice the operating system and background apps also use memory, so 16 GB is the comfortable target.

Do I need an SSD?

The publisher does not require one. An SSD does noticeably reduce loading times, so if your budget allows, installing the game on one is worthwhile.

Can I play on a laptop?

Yes, but check the laptop's power limit and cooling, because same-named laptop GPUs usually perform below their desktop counterparts. Keep it plugged in, use a high-performance power mode, and confirm the configured power setting.

Which settings should I lower first?

In a game built around destruction and simulation, shadows, volumetric effects and ray tracing tend to be the heaviest. If performance is tight, reduce these before touching other options.

Is upscaling worth using?

If your card supports DLSS, FSR or XeSS, a quality mode usually balances image quality and performance well. It renders at a lower internal resolution and scales up, so fine detail may differ slightly.