Stellar Blade™ PC Hardware Guide
Official requirements explained
The official minimum for Stellar Blade asks for an Intel Core i5-7600K or AMD Ryzen 5 1600X processor, an NVIDIA GeForce GTX 1060 6GB or AMD Radeon RX 580 8GB graphics card, 16GB of RAM, 75GB of storage, and a solid-state drive. By FrameScope's comparison, the minimum CPU sits at roughly the older mainstream tier (around the Core i5-7400), while the minimum GPU is an older budget-class card. In practice, that is the threshold for the game to run at all, not a target for a smooth experience.
The official recommended level asks for an Intel Core i5-8400 or AMD Ryzen 5 3600X, an NVIDIA GeForce RTX 2060 SUPER or AMD Radeon RX 5700 XT, the same 16GB of RAM, the same 75GB of storage, and an SSD. The CPU again lands in the older mainstream band, and the GPU is an entry-level gaming card. The main difference between the two levels is the graphics card. If you want higher settings and resolution, aim for the recommended GPU.
RAM is 16GB at both levels, so there is no difference there, though 32GB gives more headroom if you also stream or keep many programs open. The publisher explicitly requires an SSD, which matters more than it might seem, as explained below. Where the official data does not list a particular item for a level, the publisher has not specified it, and this guide does not guess.
Recommended builds for three budgets
The entry build suits players on older hardware or a tight budget who are happy to lower settings to get a playable experience. The GPUs in this tier, such as the GTX 1660 or RTX 3050, only meet the official minimum, so expect to reduce most quality options to keep the game stable. The processors listed here, such as the Ryzen 3 3100, Core i3-10100F, or Ryzen 5 3500, meet the recommended level, so the CPU should not be the bottleneck. Pair them with 16GB of RAM, the official minimum, and do not go lower.
The mainstream build is the choice most players should consider. The RTX 2060 SUPER, RX 5700 XT, RTX 3060 12GB, and RX 6600 XT all meet the official recommended level and can handle medium-high settings. Processors such as the Ryzen 5 4500 and Core i5-10400 also meet the recommended level. 16GB of RAM is enough here, and 32GB is a nice upgrade if your budget allows it. This tier offers the best value for most people.
The high-end build uses cards such as the RTX 3080 Ti, RX 7800 XT, and RTX 4070, which sit well above the official recommended level. It suits players who want higher resolution and full quality settings. On the CPU side, the Ryzen 7 5800X, Ryzen 5 7600, and Core i5-14400 are also well above the recommended level. 32GB of RAM is a sensible choice here so the system stays comfortable during long sessions with other programs running.
Graphics settings with the biggest impact
In an action-adventure game like this, the settings that usually cost the most are shadow quality, volumetric lighting and fog, ray tracing if the game offers it, crowd or simulation density, and view distance. Shadows and volumetrics often load both the GPU and CPU, so lowering them is usually the most effective change, and the visual loss is often smaller than the performance gain. If ray tracing is available, it tends to be the most expensive option, so consider turning it off if your graphics card is at the lower end of the requirement tiers.
Texture quality mainly depends on VRAM capacity rather than raw computing power. As long as your graphics card has enough video memory, setting textures high is usually inexpensive and keeps surfaces detailed. Anti-aliasing is a matter of balancing sharpness against cost; temporal methods are common in games like this and are worth testing against your own tolerance for blur.
Upscaling technologies such as NVIDIA DLSS, AMD FSR, and Intel XeSS render the game at a lower internal resolution and reconstruct the image at your output resolution. If your graphics card supports one of them, it is often the single most useful tool for smoother play. A quality mode is usually the best starting point, and you can adjust from there based on what you see. Availability depends on the game and your hardware, so check the in-game options.
Laptops and handheld PCs
Laptop graphics chips often share names with desktop cards but do not perform the same. Power limits, cooling, and memory configuration are usually more conservative in laptops, so a laptop card with the same name can deliver noticeably less at the same settings. When buying a laptop, look at the card's power limit (TGP) and the cooling design rather than the model name alone.
Handheld PCs such as the Steam Deck or ROG Ally are built around lower-power integrated or mobile hardware. For this kind of game, you will typically set graphics to low or medium and rely on upscaling to balance image quality against battery life. Thermal and power limits also affect how stable performance is during long sessions, so adjusting the power profile is worthwhile. FrameScope has no verification data for handheld devices, so these are general suggestions and not a compatibility rating for any specific model.
If you plan to play on a laptop or handheld, confirm that your free storage and SSD meet the official requirements, and keep the system and drivers up to date.
Storage and memory
The official minimum and recommended levels both list 16GB of RAM. Running two sticks in dual-channel mode doubles memory bandwidth, which helps the processor and integrated graphics, so use a matched pair rather than a single module. If you want more comfortable multitasking, 32GB is a reasonable upgrade.
The official install size is 75GB. Leave extra space for patches and shader caches, because updates need temporary room and can fail when a drive is nearly full.
The publisher explicitly requires an SSD. SSDs read data far faster than traditional hard drives, which shortens loading times and reduces stutter caused by streaming assets during play. A hard drive is cheaper per gigabyte, but for a game that loads and streams this much data, the experience is noticeably worse, so it is not recommended.
