Songs of Conquest PC Hardware Guide
Official requirements explained
The official minimum CPU for Songs of Conquest is listed as an Intel i5 dual core or a Ryzen 5. Roughly speaking, that is an older entry-level processor, comparable to something like an AMD Athlon 64 X2 6000+, which is more than a decade old. The publisher does not name a specific generation, so treat that as a rough reference rather than a precise target.
The minimum graphics entry is an integrated graphics chip, the GPU built into the processor, which only needs DirectX 9 or OpenGL support. That roughly corresponds to older integrated graphics such as Intel HD Graphics 4000. If your display works, the game will start, but image quality and smoothness will be clearly limited. The recommended graphics card is a GTX 970, an RX 570, or something similar. In our reference, a GTX 1650 4GB sits at the recommended level, while the laptop version of the RTX 3050 sits comfortably above it.
The official minimum RAM is 8GB and the minimum storage is 4GB. The publisher does not list recommended amounts for either, and it does not require an SSD. In practice, the gap between minimum and recommended shows up mostly in the graphics card. Once the card reaches the recommended level, pairing it with 16GB of RAM and a modern six-core CPU should give you plenty of headroom at standard settings.
Recommended builds for three budgets
The entry build suits players who want to try the game on a tight budget. It pairs a Ryzen 3 3100 with a GTX 1650 4GB. Both parts reach the official recommended level, so the game should run smoothly at standard settings. Four gigabytes of VRAM is enough for the large maps and crowded battles, but higher effect settings will need to be lowered. 16GB of RAM is a comfortable step above the minimum.
The mainstream build suits players who want a steadier experience and some room to raise quality. A GTX 1660 clearly exceeds the official recommended level, and CPUs such as the Ryzen 5 3500 or Intel Core i5-10400 reach the recommended level. With 16GB of RAM you can keep a browser or other programs open during play without things getting tight.
The high-end build suits players who want higher quality or plan to keep the same PC for years. An RTX 3060 Ti or RTX 2080 Super both sit well above the official recommended level. Pairing one with a newer CPU such as the Ryzen 7 9800X3D or Intel Core i9-14900K leaves room for big armies and complex scenes. 32GB of RAM is more than this game strictly needs, but it gives comfortable headroom for multitasking and future demands.
Graphics settings with the biggest impact
In strategy and RPG games like this, the load usually comes from simulating many units and from lighting and shadow effects. Shadow quality and volumetric effects are often the most expensive options, especially during battles with many units and complex light sources. If your graphics card is struggling, lowering these two by one step is usually the quickest improvement, and the visual difference is often small.
View distance and vegetation density also add load, because they decide how many objects must be drawn at once. If you spend most of your time in specific regions of the map, you can lower these a little and keep resources for smooth combat and interface response. Anti-aliasing tends to be cheaper, though on entry-level cards a lighter option may be worth choosing.
Ray tracing is generally not essential for a game like this. If your card lacks dedicated hardware acceleration for it, leave it off. Upscaling technologies such as DLSS, FSR, or XeSS render at a lower internal resolution and then scale the image up. They can ease the load on the graphics card with a modest loss in image quality, which makes them useful for steadier performance. Support and results depend on your specific graphics card model.
Laptops and handheld PCs
A laptop graphics chip shares its name with a desktop part but usually performs noticeably lower. Laptops are limited by cooling space and power limits, so a laptop RTX 3050 typically trails the desktop version. When buying, look at the stated graphics power (TGP) and the cooling design rather than just the model name.
When playing on a laptop, plug in the charger and set the power mode to high performance. Otherwise the system may cut the graphics power to save energy. If the machine overheats and slows down, cleaning the vents and improving airflow can sometimes help.
Handheld PCs such as the Steam Deck or ROG Ally are portable, so both battery life and cooling are limited. In general, these devices work best at lower settings and resolutions, and you may need to use the system's built-in performance controls to get a steadier result. We do not have handheld verification data, so use the game's official requirements as your reference and adjust settings on the device itself.
Storage and memory
For memory, the official minimum is 8GB and no recommended amount is listed. 8GB can start the game, but it gets tight when other programs are open, so we suggest at least 16GB. For higher quality settings or long sessions, 32GB gives more comfortable headroom. When installing RAM, use dual-channel mode, meaning two sticks of equal capacity in the matching slots. This increases the data bandwidth between the CPU and the graphics card.
The official minimum storage is 4GB, so the game itself does not need much space. The publisher does not require an SSD, so a hard drive will work. An SSD does shorten loading times noticeably, and if you often switch between scenes or save and load, the difference is easy to feel.
Keep enough free space on your drive for updates and save files. For most players, leaving several tens of gigabytes free is more than enough.
