Riders Republic PC Hardware Guide
Official requirements explained
The official minimum for Riders Republic lists an Intel Core i5-4460 or AMD Ryzen 5 1400 processor, an Nvidia GeForce GTX 970 (4GB) or AMD RX 470 (4GB) graphics card, 8GB of RAM and 20GB of storage. By today's standards the i5-4460 is a very old entry-level chip, and the GTX 970 sits roughly at the level of a GTX 1650 4GB, which is also an entry-level card.
The recommended tier asks for an Intel Core i7-4790 or AMD Ryzen 5 1600, paired with an Nvidia GeForce GTX 1060 (6GB) or AMD Radeon RX 570 (8GB). The recommended graphics card roughly corresponds to a Radeon R9 390, and the recommended processor is close to an i7-4770K, which again is an older generation. The gap between the two tiers is mainly about graphics and CPU performance, so a graphics upgrade usually helps more than adding memory alone.
The publisher does not require an SSD. It only lists storage space, so a traditional hard drive will work, though loading times will be noticeably longer. Both the minimum and recommended tiers list 8GB of RAM, but that is a floor rather than a comfortable target; most players find 16GB much more relaxed in practice.
The official listings are also quite dated, so treat them as a rough guide rather than a precise prediction of how any modern system will behave.
Recommended builds for three budgets
The entry build suits players who want to get into the game on a tight budget. It pairs a GeForce GTX 1650 4GB with a Ryzen 3 3100 and 16GB of RAM. The GTX 1650 4GB only meets the official minimum, so you will need to drop settings to low or medium to keep things smooth. The Ryzen 3 3100 meets the recommended processor level. This setup fits players who play occasionally and do not mind a lower visual ceiling.
The mainstream build is aimed at a comfortable 1080p experience. It uses a GeForce GTX 1660 Super with a Ryzen 5 3500X and 16GB of RAM. The GTX 1660 Super is well above the recommended graphics tier and the processor also sits well beyond the recommended level, which leaves room to run most settings comfortably. An RTX 3050 8GB is a reasonable alternative at this level, and the 8GB version has an advantage with high-resolution textures.
The high-end build suits players who want higher visual quality, higher resolution, or long play sessions. It combines a GeForce RTX 3060 Ti with a Ryzen 5 5600X and 32GB of RAM. Both parts sit well above the recommended tier, enough to handle high settings and upscaling, and 32GB gives more headroom for large maps and multitasking. This is the tier where value for money deserves the most thought, so it is worth it only if you really want to push visuals higher.
All three builds use 16GB or more of RAM, which is above the official 8GB figure and reflects what a comfortable setup looks like in practice.
Graphics settings with the biggest impact
In a large open-world multiplayer racing and sports game like this, the settings that usually cost the most are shadows, volumetric lighting and fog, vegetation and crowd simulation density, and view distance. Shadows and volumetric effects multiply across open terrain, so lowering them often gives the biggest performance gain for the least visible loss. View distance and vegetation density add load on distant scenery, which matters most on mountain routes and long descents.
Texture quality is usually worth keeping high, since it strongly affects sharpness and mainly depends on graphics memory capacity rather than raw compute. If your graphics card supports ray tracing, consider enabling only the lighter options or turning it off to get a steadier frame rate.
Upscaling technologies such as DLSS, FSR and XeSS work by rendering at a lower internal resolution and reconstructing the image at your target resolution. They can improve performance with a modest loss in image quality. Which modes are available depends on your graphics card, and results vary by scene, so compare a few modes yourself before settling on one.
Laptops and handheld PCs
Laptop graphics chips often share names with desktop cards but deliver less performance. Laptops run under tighter power limits and have less room for cooling, so the same chip may operate at a lower wattage. When shopping, check the power limit (TGP) and cooling design rather than relying on the model name alone. To play, plug in the charger and set the power profile to performance mode, since running on battery will limit the GPU.
Handheld PCs such as the Steam Deck or ROG Ally are low-power portable platforms. Their overall performance usually falls between entry-level and low-mid desktop systems, so they are best played at lower settings and resolutions, often with upscaling or a capped frame rate to keep things stable. We have no Steam Deck verification data for this title, so we cannot give a specific compatibility rating; check community feedback on the platform before deciding. Heat and battery life also change significantly under sustained load, so keep an eye on temperatures during long sessions.
Storage and memory
For memory, the official minimum and recommended tiers both list 8GB, but the operating system and background programs already take a share while the game runs, so 16GB is a more realistic starting point. A dual-channel configuration, such as two sticks of 8GB or two of 16GB, improves data transfer between the processor, graphics card and memory, which gives a real benefit to performance.
For storage, the official listing is 20GB, but you should leave extra room for updates, caches and any content added later. An SSD is not required, and a traditional hard drive will still run the game, but an SSD clearly shortens loading and map transition waits and helps keep open-world movement smooth. If your budget allows, install the game on an SSD and keep plenty of free space on the drive.
