Resident Evil Requiem PC Hardware Guide
Official requirements explained
The official minimum CPU is an Intel Core i5-8500 or AMD Ryzen 5 3500, which roughly corresponds to an older mainstream chip today, at the entry level. The minimum GPU is a GeForce GTX 1660 6GB or Radeon RX 5500 XT 8GB, also entry-level. In practice, the minimum tier is about getting the game running and playable, and you will usually need to keep graphics at low or medium to do so.
The recommended tier steps up to an Intel Core i7-8700 or AMD Ryzen 5 5500 for the CPU, and a GeForce RTX 2060 Super 8GB or Radeon RX 6600 8GB for the GPU. That sits between entry gaming and the mainstream sweet spot, and suits players who want to play at higher settings. Both tiers list 16GB of RAM, so the real difference between them is in the graphics card and processor rather than memory.
The publisher also requires an SSD at both levels. It does not list an exact storage size, so you should leave yourself plenty of room. A system with only a hard disk drive falls short of the official requirements, and loading and scene transitions will be noticeably slower.
Recommended builds for three budgets
The entry build suits players with a tight budget who mainly want the game to run. The GPU is a GeForce GTX 1660, which only meets the official minimum, so the game will start but you will need to set graphics to low or medium. The CPU is an AMD Ryzen 5 3500X, which meets the official recommended tier, so the processor should not hold the system back. It is paired with 16GB of RAM, which matches the official requirement. This combination offers strong value, but the ceiling on visual quality is set mainly by the graphics card.
The mainstream build is the most practical choice for most players. The GPU is a GeForce RTX 3060 8GB and the CPU is an Intel Core i5-10400F, and both meet the official recommended tier. It uses 16GB of RAM, though 32GB gives more headroom if you run other programs alongside the game. This tier can be played at the officially recommended standard and is a sensible, balanced option.
The high-end build suits players who want headroom or plan to play at higher resolutions. The GPU is a GeForce RTX 4070 and the CPU is an AMD Ryzen 7 7700, both well above the official recommended tier. It pairs with 32GB of RAM, which gives more room for multitasking and recording. The main benefit here is that you keep a comfortable margin even if you raise graphics settings or resolution.
Graphics settings with the biggest impact
In action-adventure games like this one, the settings that usually cost the most are shadows, volumetric lighting and fog, and ray tracing. Raising shadow quality adds a noticeable load to the graphics card, and volumetrics and fog are expensive when used heavily in a scene. If you want to free up performance, these are the first settings to lower, and the visual difference is usually modest.
View distance and the density of environmental detail also add to the load. Pushing view distance to the maximum or leaving every environmental detail option at its highest stresses both the GPU and system memory. Ray tracing is one of the most demanding options, so if your graphics card is not high-end, it is best to turn it off and spend your resources on a stable base image quality.
Upscaling technologies such as DLSS, FSR and XeSS work by rendering the picture at a lower internal resolution and then reconstructing it to your output resolution. In general, enabling them reduces the graphics card's workload with only a small loss in image quality. Which options you can use depends on your GPU brand and generation, and the settings menu will list what is available.
Laptops and handheld PCs
A laptop GPU is not the same as the desktop card with the same name. Laptop versions are usually limited by power draw and cooling, so they tend to perform below their desktop counterparts. When buying a laptop, check the GPU's power limit (TGP) and not just the model name. Machines with good cooling are also better at holding stable performance during long sessions.
Handheld PCs such as the Steam Deck or ROG Ally are portable computers. Their advantage is that you can play in different places, while their limits are lower power and less room for cooling. On devices like these, it is generally best to lower resolution and graphics settings and make use of in-game scaling or upscaling options. We do not currently have Steam Deck compatibility data, so user reports are the best guide for that device.
If you plan to play on a handheld or laptop, check your power supply and cooling first, and keep the device in a well-ventilated space. Under prolonged heavy load, performance can drop as temperatures rise.
Storage and memory
For memory, both the official minimum and recommended tiers call for 16GB. Dual-channel configuration provides better memory bandwidth, so when installing RAM, make sure the two sticks are in the correct slots so the system runs in dual-channel mode. If you expect to run other programs or mods at the same time, 32GB gives more breathing room.
For storage, the publisher does not list an exact size, but both tiers require an SSD. A solid-state drive noticeably shortens read and load times and reduces stuttering during scene transitions. A hard disk drive does not meet the official requirements, and is not recommended for installing this game.
As for capacity, leave plenty of free space, since game updates and cache files take up storage over time. Keep some spare room beyond the game itself so that installs and patches do not fail for lack of space.
