Need for Speed™ Heat PC Hardware Guide
Official requirements explained
The publisher lists a minimum CPU of an FX-6350 or equivalent, or a Core i5-3570 or equivalent. The minimum GPU is an AMD Radeon 7970 or R9 280X, or an NVIDIA GeForce GTX 760 or equivalent. The minimum calls for 8 GB of RAM and 50 GB of storage. By today's standards these parts sit in the old-generation entry tier. They will get the game running, but you should expect to lower settings considerably.
The recommended level asks for a Ryzen 3 1300X or Core i7-4790 or equivalent for the CPU, and an AMD Radeon RX 480 or NVIDIA GeForce GTX 1060 or equivalent for the GPU. RAM goes up to 16 GB, and storage stays at 50 GB. The GTX 1060 is still an older, budget-oriented card, so the recommended tier is not demanding, but it gives you noticeably more room than the minimum for a more comfortable picture.
The biggest jumps between the two levels are the graphics card and the memory. The GPU moves from roughly GTX 760 class to GTX 1060 class, and RAM doubles from 8 GB to 16 GB. Those two changes matter most for smoothness and for keeping things stable when you have other programs open. The publisher does not require an SSD, though one is still worth having for the reasons covered below.
Recommended builds for three budgets
The entry build pairs an NVIDIA GeForce GTX 1650 Super with a Ryzen 5 3500 and 16 GB of RAM. The GTX 1650 Super meets the recommended requirements, which makes it a sensible choice for players who want to keep costs down and still play comfortably at medium settings. The Ryzen 5 3500 is well above the recommended CPU level, so background tasks are unlikely to drag down the game.
The mainstream build uses an NVIDIA GeForce RTX 3050 6GB with a Core i5-10400F and 16 GB of RAM. The RTX 3050 6GB is well above the recommended GPU level, leaving room for higher settings and for future adjustments. The Core i5-10400F is also well above the recommended CPU, so the system is well balanced for most players who care about value.
The high-end build combines an NVIDIA GeForce RTX 3060 Ti with a Ryzen 5 5600 and 32 GB of RAM. Both parts are well above the recommended requirements, which gives plenty of headroom at high settings. The 32 GB of memory also means you can record or stream while the game runs without worrying about running short.
Graphics settings with the biggest impact
In an open-street racer like this one, shadows, volumetric effects and ray tracing usually cost the most. Shadows tend to matter most, since the scene is full of cars and buildings casting them. If your graphics card is not especially strong, start by dropping shadows to medium or low, as the visual difference is often easier to accept than with other options.
Volumetric effects, such as fog and light scattering, add load too, but the visual loss is usually small, so they are a good candidate for lowering. Traffic and crowd density are simulation settings. Keep them at medium if you want the street atmosphere intact. View distance is a matter of taste, though very high values can slow things down noticeably on weaker cards. If your GPU supports ray tracing, the effect looks good but is usually the most expensive option, so it is best left off on entry and mainstream builds.
Upscaling technologies such as DLSS, FSR and XeSS work by rendering at a lower internal resolution and then scaling the image up to your target resolution with an algorithm. This can improve smoothness without a large sacrifice in image quality. If your card supports one of them, turning it on is usually more effective than simply lowering every setting.
Laptops and handheld PCs
Laptop graphics chips often share names with desktop cards, but real performance can differ a lot. Laptop versions are limited by power budgets and cooling space, so a card with the same name can run well behind its desktop counterpart. When you evaluate a laptop, look at its GPU power limit and cooling design, not just the model name.
Handheld PCs such as the Steam Deck and ROG Ally are portable PCs with their own hardware, so desktop requirement comparisons do not carry over directly. In general these devices are best run at lower settings and resolutions, often with upscaling enabled and a frame-rate cap set to keep the experience steady. We have no dedicated verification data for handhelds, so use the publisher's requirements as a rough guide and tune settings step by step.
Storage and memory
The publisher asks for 50 GB of storage, which is a reasonable amount by current standards, but leave extra room for updates and other files. For memory, the minimum is 8 GB and the recommended level is 16 GB. Sixteen gigabytes keeps data moving smoothly between the system and the game and reduces the chance of stutter caused by running short.
Dual-channel memory is also worth getting right. Installing two sticks in the correct slots gives more bandwidth than a single channel and makes a real difference to overall performance. If your motherboard supports it, use a dual-channel layout.
The publisher does not require an SSD, but an SSD shortens loading noticeably compared with a hard drive, so world and scene loads will be quicker. If your budget allows, installing the game on an SSD is the more comfortable choice. Whatever drive you use, keep enough free space so that updates and cache files can work properly.
