Jurassic World Evolution 3 PC Hardware Guide
Official requirements explained
The official minimum for Jurassic World Evolution 3 lists an Intel i5-6600K or AMD Ryzen 5 2600 for the CPU, and an NVIDIA GeForce GTX 1060 (6GB VRAM), AMD Radeon RX 5600 XT (6GB VRAM) or Intel Arc A750 (8GB VRAM) for the GPU. It asks for 16GB of RAM, 25GB of storage and an SSD. In our tier ranking, the minimum GPUs sit in the 1080p mainstream class, and the minimum CPU is an older mainstream part.
The official recommended level is an Intel i7-10700K or AMD Ryzen 7 5800, paired with an NVIDIA GeForce RTX 2070 Super (8GB VRAM), AMD Radeon RX 6700 XT (12GB VRAM) or Intel Arc B580 (12GB VRAM). RAM stays at 16GB, storage at 25GB, and an SSD is again required. The recommended GPU is roughly an upper-mainstream card, and the CPU is a newer mainstream part. In practice, the recommended level mainly steps up the graphics card and processor while leaving memory and storage unchanged.
What the gap means for you is simple: hardware that meets the recommended level gives you room for higher settings and steadier simulation. Hardware that only meets the minimum will usually need some settings lowered. The publisher does not list any tier above recommended, so we cannot say more about heavier loads.
Recommended builds for three budgets
The entry build suits players who want to start on a tighter budget and accept lower settings. We suggest a GeForce GTX 1660, RTX 3050 or Radeon RX 5600 XT, with a CPU such as the Ryzen 5 4500 or Core i5-10400F, and at least 16GB of RAM. This roughly matches the official minimum and works best at 1080p on low to medium settings.
The mainstream build is the most practical choice for most players. It clears the official recommended level and holds good visuals across most settings. Consider a GeForce RTX 2070 Super, RTX 4060, Radeon RX 7600 or Intel Arc B580, with a Core i7-10700K, Ryzen 5 5600G or Core i5-12400F. Start at 16GB of RAM; 32GB gives more breathing room if you keep other programs open.
The high-end build is for players who want higher resolutions and more effects and is well above the recommended level. Our candidates include the Radeon RX 7800 XT, GeForce RTX 4070 Super, RTX 5070 and Radeon RX 9070, with CPUs such as the Core i5-14600K or Ryzen 7 9700X. 16GB remains the floor, but 32GB makes multitasking and long sessions with large parks easier if your budget allows.
Graphics settings with the biggest impact
In simulation games like this one, the settings that usually cost the most are shadows, volumetric lighting and fog, and simulation density such as the number of dinosaurs and visitors on screen. Shadows and volumetric effects often make only a small visual difference while taking a large share of GPU time, so try medium first and raise them only if you have headroom. View distance and vegetation density also add load, especially in large parks.
Ray tracing, if offered, is among the most demanding options. For a game viewed mostly from above, the visual gain may not justify the cost, so unless your graphics card is strong, leave it off or use the lowest setting.
Upscaling technologies such as NVIDIA DLSS, AMD FSR and Intel XeSS render at a lower internal resolution and rebuild the image, which can noticeably reduce GPU load. On the quality or balanced modes the image loss is usually modest. Which options appear depends on the game's menus, and we do not have specific performance figures to share.
Laptops and handheld PCs
Laptop graphics chips often share a name with desktop parts, such as an RTX 4060, but mobile versions are limited by power and cooling, so they typically perform below their desktop namesakes. When choosing a laptop, check its GPU power limit (TGP) and cooling design rather than the model name alone. While playing, set the power mode to high performance and keep the laptop plugged in, since battery mode usually restricts performance heavily.
Handheld PCs such as the Steam Deck or ROG Ally run standard PC architecture but have tighter power and thermal limits. We have no Steam Deck verification data, so we cannot give a compatibility rating for it. As general guidance, use low settings and a lower resolution with an upscaler, and cap the frame rate at a steady value to reduce heat and battery drain. For long sessions, plug in and make sure the device has good airflow.
Storage and memory
The official requirements ask for 16GB of RAM and an SSD, with 25GB of storage. 16GB meets both the minimum and recommended levels, but if you run a browser, chat apps or streaming tools alongside the game, 32GB gives more room. Use dual-channel memory by installing two matching modules in the correct slots, which helps the processor and overall performance.
The SSD requirement exists because the game loads large amounts of scene and model data, and an SSD greatly shortens load times and reduces stutter during area changes. A traditional hard drive may still run the game, but loading will be noticeably slower. The 25GB figure is the listed base size; installation and later updates may need more, so keep plenty of free space to avoid failed updates.