PC SYSTEM REQUIREMENTS & GUIDE

Half-Life: Alyx

This page was drafted with AI assistance from our structured data, passed automated quality checks and is spot-checked by our editor · Last checked: November 14, 2026

Half-Life: Alyx is Valve’s VR return to the Half-Life series. It’s the story of an impossible fight against a vicious alien race known as the Combine, set between the events of Half-Life and Half-Life 2. Playing as Alyx Vance, you are humanity’s only chance for survival.

Half-Life: Alyx cover art
HARDWARE GUIDE

Half-Life: Alyx PC Hardware Guide

Official requirements explained

Half-Life: Alyx is published by Valve, and its official minimum CPU is a Core i5-7500 or Ryzen 5 1600. Today that corresponds roughly to an entry-to-early-mainstream level, so chips such as the Intel Core i5-7400 sit in the same range. The official minimum graphics card is a GTX 1060 or RX 580 with 6GB of VRAM. In current product terms, that is roughly the level of the AMD Radeon R9 390, an older entry card that can run the game but will usually need lower settings. The official minimum RAM is 12GB.

Valve did not publish recommended requirements, so the recommended CPU, GPU, RAM and storage fields are not specified. Based on our own estimates from the minimum tier, a recommended-level graphics card would be around the NVIDIA GeForce RTX 3050 6GB and a recommended-level CPU around the AMD Ryzen 5 3500. These are our reference points, not official figures from the publisher. In practice, the minimum tier means the game will run, while comfortable long sessions at higher detail need hardware one step up.

The publisher does not require an SSD, and no storage size is listed. An SSD is not mandatory, but it still shortens load times and helps keep VR content feeling smooth.

Recommended builds for three budgets

The entry build suits players on a tight budget who mainly want the game to run. We pair an NVIDIA GeForce GTX 1660 with an AMD Ryzen 3 3100 and 16GB of RAM. Note that the processor here only meets the official minimum, and the graphics card, while on the list, also only meets the minimum, so you will need to lower settings to keep performance steady. If you want to get closer to the recommended tier on a similar budget, the AMD Ryzen 5 3500 meets the recommended tier in our data, and pairing it with an RTX 3050 6GB or GTX 1660 Super gives more headroom.

The mainstream build is the sensible choice for most players. Graphics options include the NVIDIA GeForce RTX 3050 8GB, GTX 1660 Ti or AMD Radeon RX 5600 XT, and processor options include the AMD Ryzen 5 3600 or Intel Core i5-11400, with 16GB of RAM. In our data, these processors and graphics cards all meet the official recommended tier, so you can play at recommended-level settings comfortably. It suits players who want steady visuals without overspending.

The high-end build is for players who want high detail and plenty of margin. Graphics options include the NVIDIA GeForce RTX 5070 Ti, RTX 5080 or AMD Radeon RX 9070 XT, and processor options include the AMD Ryzen 7 9800X3D or Intel Core i9-14900K, with 32GB of RAM recommended. According to our data these combinations also meet the official recommended tier. Compared with the mainstream build, the main difference is room to enable heavier effects rather than simply whether the game runs.

Graphics settings with the biggest impact

In a VR game built around indoor spaces and close-range interaction like this one, the settings that usually cost the most are shadow quality, volumetric lighting and fog, and advanced lighting calculations. Shadows are the heaviest when many light sources and nearby objects are involved, so set them to medium first; the visual difference is often small while the load on the graphics card drops noticeably. Volumetrics and fog look impressive but consume a lot at high settings, so lower them first if the picture feels unstable.

If your graphics card supports ray tracing, it is best left off. It places a heavy load on mid- and lower-tier cards, and the visual gain inside VR is limited. View distance and detail density are also worth adjusting, since a very long view distance increases the amount of drawing the GPU must do, and moderate reductions rarely change how the game feels.

Upscaling is a practical way to improve smoothness. NVIDIA DLSS, AMD FSR and Intel XeSS render at a lower internal resolution and reconstruct a higher-resolution image, with some possible loss in sharpness. In VR the results depend on the game and your settings, so compare them yourself before deciding, and avoid chasing very high resolution at the expense of overall stability.

Laptops and handheld PCs

Laptop graphics cards that share a name with desktop parts are usually slower. Laptops are limited by power ceilings and cooling space, so the mobile version of a card typically runs behind its desktop namesake, and you should not judge a laptop only by the model name. When shopping, check the machine's power limit (TGP) and cooling design, and confirm whether it only delivers full performance while plugged into its power adapter.

Handheld PCs such as the Steam Deck or ROG Ally are portable devices with limited power and thermal headroom. In general they need lower graphics settings and more conservative targets to keep temperatures and battery life under control. VR games are demanding, so expect to make more compromises if you plan to play this one on a handheld.

We do not have Steam Deck verification data for this game, so we cannot give a compatibility rating for that device. Use the official requirements and your device's specifications as your guide, and adjust settings to suit.

Storage and memory

The official minimum RAM is 12GB, but once the operating system and background programs take their share, 16GB is the practical minimum we recommend. For higher settings or running other programs at the same time, 32GB gives more comfortable headroom. When installing memory, use a dual-channel configuration by filling matched pairs of modules, which raises memory bandwidth and makes a real difference to overall performance.

No storage size or SSD requirement is listed officially, so we cannot give a publisher figure. As a general rule, leave enough free space for the game and its future updates. An SSD is not required, but compared with a traditional hard drive it cuts load times noticeably and speeds up reading VR content. If your budget allows, install the game on an SSD.

Finally, game and driver updates take up extra space, so keep some capacity free. A drive that is nearly full can slow reads and writes and may get in the way of smooth updates.

BUILD SUGGESTIONS

Builds for Three Budgets

TierGraphics cardProcessorRAMWhy
EntryNVIDIA GeForce GTX 1660AMD Ryzen 3 310016 GBThis build suits players on a tight budget who want the game to run. Both the processor and the graphics card only meet the official minimum, so you will need to lower settings to keep performance steady.
MainstreamNVIDIA GeForce RTX 3050 8GBAMD Ryzen 5 360016 GBBoth the graphics card and the processor meet the official recommended tier in our data, making this a good fit for players who want to play comfortably at recommended-level settings without overspending.
HighNVIDIA GeForce RTX 5070 TiAMD Ryzen 7 9800X3D32 GBThis combination also meets the official recommended tier in our data and leaves considerable headroom, suiting players who want to enable heavier effects and keep room for future use.

Builds are chosen against the official minimum and recommended requirements and our hardware tiers; they are estimates, not measured FPS.

OFFICIAL REQUIREMENT GUIDE

Understanding System Requirements for Half-Life: Alyx

Comparing minimum versus recommended specifications highlights whether upcoming upgrades should target graphics horsepower, processor threads, RAM capacity, or SSD storage.

MINIMUMMinimum Requirements (official)
Graphics Card (GPU)
GTX 1060 / RX 580 - 6GB VRAM
Processor (CPU)
Core i5-7500 / Ryzen 5 1600
Memory (RAM)
12 GB
Storage Space
TBD

The lowest hardware the publisher supports for launching and playing the game; not the same as a good experience.

RAM Delta

RAM requirement is identical; GPU and CPU will be the primary performance differentiators.

Storage Drive

SSD is optional according to official specs, but highly recommended for fast loading.

Evaluation Method

GPU, CPU, VRAM, RAM, and storage are evaluated independently; overall verdict is bounded by the bottleneck.

HARDWARE REQUIREMENT TIERS

Representative Hardware Baselines

The hardware models below are mapped against the official minimum and recommended tiers for quick reference. This is a requirement comparison, not a resolution or FPS promise.

CHECK YOUR SPECS

Can Your PC Run Half-Life: Alyx?

Select your GPU, CPU, and RAM to evaluate your exact compatibility level against official tiers.

FAQ

Frequently Asked Questions

What are the official minimum requirements for Half-Life: Alyx?

The official minimum is a Core i5-7500 or Ryzen 5 1600 processor, a GTX 1060 or RX 580 graphics card with 6GB of VRAM, and 12GB of RAM. No recommended requirements were published, and no SSD is required.

Can my older graphics card run this game?

If your card is around the level of the AMD Radeon R9 390, it only meets the official minimum. The game will run, but you will need to lower the settings. For long, comfortable sessions, a recommended-level card such as one around the RTX 3050 6GB is a better target.

Do I need 16GB or 32GB of RAM?

The official minimum is 12GB, but we recommend at least 16GB in practice to cover the operating system and background programs. For higher settings or running other applications at the same time, 32GB gives more comfortable headroom.

Is an SSD required?

No, the publisher does not require an SSD. However, an SSD noticeably shortens load times and helps VR content load faster, so it is worth using one if your budget allows.

Can I play on a laptop?

Yes, but laptop graphics cards that share a name with desktop parts are usually slower because of power and cooling limits. Check the machine's power limit and cooling design before buying, and confirm it delivers full performance on its power adapter.

Which graphics settings should I lower first?

Shadows, volumetric lighting and fog usually cost the most, so start there. If your card supports ray tracing, it is best left off because the load is heavy and the visual gain in VR is limited.

Do DLSS, FSR or XeSS help?

Upscaling renders at a lower internal resolution and reconstructs a sharper image, which can improve smoothness at some cost to image quality. Compare the results yourself before deciding whether to enable it.