ENDER MAGNOLIA: Bloom in the Mist PC Hardware Guide
Official requirements explained
ENDER MAGNOLIA: Bloom in the Mist is published by Binary Haze Interactive. The official minimum asks for a dual-core CPU at 2.5GHz, a graphics card with 2GB of VRAM, 4GB of RAM and 5GB of storage. In our tier comparison, the minimum GPU lines up roughly with an NVIDIA GeForce GTX 670, a legacy budget card, and the minimum CPU with an AMD Athlon 64 X2 6000+, a very old dual-core chip.
The recommended level raises this to a quad-core CPU at 3.0GHz, a graphics card with 4GB of VRAM and 8GB of RAM. The recommended GPU corresponds roughly to an AMD Radeon R9 390, and the recommended CPU to an AMD A10-7850K. The gap between the two levels is mostly about visual detail and headroom: the minimum usually means the game starts and runs with reduced settings, while the recommended level describes the experience the publisher expects in normal play.
The publisher does not require a solid-state drive, and lists 5GB of storage. For a game of this size a hard drive will work, though level loading will be slower than on an SSD.
Recommended builds for three budgets
The entry build centres on a GTX 1650 Super, a GTX 1660 or an RTX 3050 6GB. The GTX 1650 Super and GTX 1660 meet the official recommended level, and the RTX 3050 6GB does too, so medium-high settings should run smoothly. Pair it with a quad-core such as the Ryzen 3 3100 or Core i3-10100F, both well above the recommended CPU and unlikely to hold the card back. Plan on 16GB of RAM even though the official recommendation is 8GB, since 16GB gives comfortable room today. If money is very tight, a GTX 1650 4GB only meets the minimum, so you will need to lower settings to keep the game stable.
The mainstream build uses a GTX 1660 Ti, an RTX 3050 8GB or an RX 5600 XT, paired with a six-core chip such as the Ryzen 5 3500X or Core i5-10400. All of these sit well above the recommended level and suit players who want higher resolution or more detail, with good value for the money. Again, 16GB of RAM is the sensible target.
The high-end build uses an RTX 3060 Ti, an RX 6700 XT or an RTX 4060 with a Ryzen 5 5600 or Core i5-12400. This tier is far beyond the recommended level for this game, and suits anyone who wants to max out the settings or stream and record at the same time. Start at 16GB of RAM, and consider 32GB if you multitask heavily.
Graphics settings with the biggest impact
In an action-exploration Metroidvania like this one, the settings that usually cost the most are shadow quality, volumetric lighting and fog, and ray tracing if it is offered. Shadows and volumetrics add a lot of work in complex areas, so if your card sits near the recommended level, dropping these to medium is usually the most effective change with the least visible loss. For entry and mainstream cards, ray tracing is best left off.
View distance and object density also matter, especially in wide outdoor areas. Turning these down costs little in visual quality and helps keep the controls feeling steady. Anti-aliasing is a matter of taste; medium or TAA is generally enough.
Upscaling technologies such as DLSS, FSR and XeSS are worth enabling where your hardware supports them. They render at a lower internal resolution and reconstruct the image at your target resolution, which can give extra headroom with little visible cost. Quality or balanced modes are a good starting point; there is no need to begin with the most aggressive performance mode.
Laptops and handheld PCs
Laptop graphics chips often share a name with desktop cards but deliver less performance, because they run under lower power limits and in tighter cooling. When comparing, check the model suffix and VRAM size, since a laptop version will not match its desktop namesake. For gaming on a laptop, plug in the power adapter, select the high-performance profile and keep the vents clear so the chip does not throttle under long sessions.
Handheld PCs such as the Steam Deck or ROG Ally are portable and suit lower resolutions with medium settings. Battery life and thermal limits are the main constraints. We do not have verified Steam Deck data for this game, so we cannot give a compatibility rating; check the official requirements against the device's specifications before deciding.
Overall, on a laptop or handheld, lowering resolution and shadow settings and turning on upscaling usually gives the smoothest result.
Storage and memory
For memory, the official recommendation is 8GB, but we suggest at least 16GB. Dual-channel configuration, with memory installed in matching pairs across the correct slots, provides more bandwidth and makes the whole system feel smoother, so confirm you are running in dual-channel mode when you install RAM.
For storage, the official figure is 5GB, but updates, save files and caches all take extra space, so leave generous room. A solid-state drive is not required, yet it noticeably shortens loading and area transitions, so if your budget allows it, an SSD is the more comfortable choice.
Finally, keep some free space on both your system drive and your game drive. Running low can cause problems with updates and saves, which many players overlook until it becomes an issue.
