DEATH STRANDING 2: ON THE BEACH PC Hardware Guide
Official requirements explained
The official minimum CPU is an Intel Core i3-10100 or AMD Ryzen 3 3100. These are older entry-level quad-core processors, roughly in line with the entry-to-mid range of the previous generation. The minimum GPU is an NVIDIA GeForce GTX 1660 or AMD Radeon RX 5500 XT 8GB, which falls in FrameScope's entry gaming tier. That means the game should run at a playable level, but most visual settings will need to be turned down.
The official recommended level rises to an Intel Core i7-11700 or AMD Ryzen 7 5700X, paired with an NVIDIA GeForce RTX 3070 or AMD Radeon RX 6800. These GPUs sit in the mainstream sweet spot. In practical terms, the recommended tier is the one the publisher expects for a fuller experience, and the gap between minimum and recommended lies mainly in the GPU and CPU class.
Both tiers list 16GB of RAM and 150GB of storage, and both explicitly require an SSD. The publisher does not list any tier below the minimum, so these are the only official figures available.
For how this affects you: if your hardware sits between the two lines, expect to balance resolution and detail rather than max everything out.
Recommended builds for three budgets
The entry build suits players on a tight budget who mainly want the game to run smoothly enough to start playing. Good GPU choices include the NVIDIA GeForce RTX 3050 8GB, AMD Radeon RX 6600 or Intel Arc A580, and a value CPU such as the AMD Ryzen 5 3500 or Ryzen 3 3100 will do. These combinations meet the official minimum only, so expect low to medium settings and keep an eye on stability. Sixteen gigabytes of RAM matches the minimum, which is enough to get started but leaves little headroom.
The mainstream build is the choice most players will find the best value. GPU options include the NVIDIA GeForce RTX 3070, AMD Radeon RX 6750 XT or RTX 4060 Ti, and CPU options include the AMD Ryzen 7 5700X, Ryzen 5 7600 or Intel Core i5-14400F. These meet the official recommended level and are the main range for balancing price and visual quality. Sixteen gigabytes is fine here, and 32GB is worth considering if you multitask or run mods.
The high-end build suits players who want top visuals and some margin for the next few years. Examples include the NVIDIA GeForce RTX 5070, AMD Radeon RX 9070 or RTX 4080, with CPUs such as the AMD Ryzen 7 7800X3D or Intel Core i9-14900K. These sit well above the official recommended level, leaving considerable room beyond the recommended settings. Thirty-two gigabytes of RAM keeps the system steady under heavy load and multitasking.
Graphics settings with the biggest impact
In an open action-adventure like this, shadows, volumetric lighting and atmospheric effects, vegetation and crowd or simulation density, and view distance usually cost the most. Shadows and volumetric effects involve a lot of real-time calculation, so dropping them from high to medium often frees up significant headroom while the visual difference is modest. Vegetation and view distance directly affect scene load, especially in wide outdoor areas.
Ray tracing, where offered, gives the largest visual upgrade but is also the most demanding. On entry or mainstream hardware, it is best to leave it off or use a lighter version so your budget goes to resolution and core detail.
Upscaling technologies such as NVIDIA DLSS, AMD FSR and Intel XeSS render at a lower internal resolution and reconstruct a sharper image. They can lighten the GPU load with little loss in image quality. As a rule, enabling a quality mode is worth it when the detail still looks acceptable to you. The exact performance gain depends on your hardware and settings, so no specific figures are promised here.
Laptops and handheld PCs
Laptop GPUs often share names with desktop parts but deliver less performance. The reasons are tighter power limits, limited cooling space and lower-power variants sold under the same name. When comparing against the official requirements, check the model suffix and the actual power budget of the laptop, not just the name. Machines with good cooling that can hold high power for long sessions will feel more consistent than thin designs.
Handheld PCs such as the Steam Deck and ROG Ally are low-power portable platforms. They usually need lower resolutions and detail settings, combined with upscaling and a frame cap to stay stable. Battery life also varies a lot with settings. We have no Steam Deck verification data for this title, so the advice here is general and no Deck rating is given.
Storage and memory
The official requirement is 150GB of storage, with an SSD explicitly required. An SSD noticeably shortens loading and scene transitions and reduces stutter when moving across large maps. Traditional hard drives are much slower, and since the publisher requires an SSD, installing on a mechanical drive is not recommended.
For memory, both the minimum and recommended levels list 16GB. Run it in dual-channel mode so the memory bandwidth works as intended, since a single stick can limit both performance and stability. If you can, 32GB gives more comfort when running other software or mods alongside the game.
Finally, keep plenty of free space for updates and cache files. Updates can take up extra room, and a full drive can cause failed installs and slower reads. Plan for some margin above the 150GB base requirement.
